The Elac Uni-Fi UF5 is an affordable floor-standing speaker that provides exceptional sonic performance and value to its users. It is well-received and highly rated, a remarkable pair of floor-standers which could even compete with some other floor-standers that cost more than them. As remarkable as they are, the Elac Uni-Fi UF5 will still require a good amp to power them.
Read Also:10 Best Home Theater Subwoofer under 100 – Expert’s Review
We can’t just grab any amps that we see and should only pair matching amps with the Elac Uni-Fi UF5. To find the right amplifiers, we will need to know more about the Elac floor-standing speakers. By learning more of its sonic characteristics and strengths, we will then be able to start sharing with you the list of the best amps which you can go for and partner them with the Elac Uni-Fi UF5 speakers.
In this article, we will be taking a closer look at the Elac Uni-Fi UF5 floor-standing speakers. We will share with you how they perform and how they sound so that you can get an idea of what kind of amplifier you should look for to match these speakers.
The UF5 is a three-way design that features a concentric midrange/tweeter housed in its own acoustic enclosure. The tweeter and midrange are both made of aluminium, a material that is extremely light and rigid, making it well suited for use in loudspeakers.
The cabinet is made of wood and has a black ash veneer finish. The front baffle is curved to reduce diffraction effects, which can cause some high-frequency sounds to be smeared because they reflect off the front baffle before reaching your ears. The UF5’s front baffle also tapers toward the top to improve the way it disperses sound waves into your listening room.
The UF5’s bass-reflex design uses a slot-shaped port on the rear panel to increase bass output without adding too much size or weight (the side-firing ports found on some speakers can cause bass problems if you put them too close to walls).
The binding posts on the rear panel accept bare wire (up to 12 gauge), banana plugs (single only) pin connectors, spade lugs, and dual banana plugs.
At CES 2018 Klipsch announced they would be introducing some new models of speakers and/or adding Dolby Atmos technology to existing models. The flagship model, the Reference Premiere Series, would get a flavour of Dolby Atmos in the form of the RP-280FA floor-standing speaker. Their more economical Reference Series would get a true Dolby Atmos-enabled speaker in the R-26FA.
The Reference Series has been around for many, many years and it was one of the first lines of Klipsch speakers I remember being introduced to. The line started with a single model, the Heresy, but as time went on it expanded to include two additional models (the Cornwall and La Scala). The original Heritage line was also introduced during this time frame and its continued existence today is a testament to its success (and popularity). The Reference Series was eventually expanded into multiple models, including the RF-3 floor-standing speaker that I ended up buying for my home theater back in 1996.
Since then Klipsch has made numerous updates to its Reference lineup over the years, including several cosmetic changes along with significant improvements in sound quality and value. In fact, I still have my original RF-3s sitting in my basement collecting dust.
If you’re in the market for a system that delivers great sound, is easy to use and simple to maintain, this is the one.
Our digital new technology provides advanced connectivity options with no compromise to audio quality. We were the first to introduce computer audio over USB. Our DACs are designed to handle all music formats, including high-resolution files up to 384kHz and DSD128.
No matter how you label it, the benefits of Sprout100 are crystal clear: sweet sonic magic, with an elegant, easy to use design, at an incredible value. It’s a product everyone in the Hi-Fi Family will love. From audio veterans to fresh-eared millennials, Sprout delivers an elevated listening experience that gets you closer to the music you love.
Sprout100 is a revelation for anyone who wants a transparent window into music without complication or cost. This isn’t your father’s DAC/preamp/amplifier stack. Sprout100 does it all and does it well. Just plug in your speakers and go!
The CXA81 is a HiFi amplifier that has been designed and engineered to bring you closer to the music you love. It’s engineered to deliver the full dynamic range, punch and clarity of your favourite albums.
The CXA81 features a high quality ESS Sabre SE9010K2M DAC chip for decoding digital signals up to 32-bit/384kHz PCM files and up to DSD 256 data streams. The SE9010K2M chip provides two channels of digital-to-analog conversion and delivers outstanding dynamic range using the patented HyperStream modular architecture and Time Domain Jitter Eliminator. This enables support for all PCM based audio formats including DXD, as well as all single-bit formats including SACD. Performance-wise, this DAC offers extremely low distortion, noise and crosstalk with a greater than 120dB signal-to-noise ratio.
The oversized toroidal transformer gives an even, low-noise current without distortion or stress. The CXA81 handles 8ohm and 4ohm speakers, delivering all the musical peaks and nuances you expect to hear.
Parasound’s NewClassic 200 Integrated amplifier offers outstanding performance and flexibility at a great price. Its Class D amplifier stage is designed by the renowned Danish company Pascal, whose work is in the world’s best loudspeakers. The topology has been refined in-house by Parasound to improve its already impressive dynamic range and damping factor.
The NewClassic 200 Integrated amplifier delivers 110 watts-per-channel RMS at 8 ohms, and can be bridged for 220 watts mono operation. Its analog bass management includes a 12 dB/octave high-pass crossover that’s adjustable from 20 Hz to 140 Hz. That way you can send low frequencies to your subwoofer while preserving your main speakers from unneeded stress. A stereo phono input with switchable gain accommodates both MM and MC cartridges (5 mV – 50 mV), giving you the option of connecting a turntable.
The Class D amp section features high current MOSFET devices configured as voltage followers for maximum fidelity, minimal distortion, and precise control of loudspeakers. It also features a circuit to address the problem of input offset common to all Class D amplifiers. The result is performance that rivals or surpasses many much more expensive amplifiers, but with the efficiency.
Parasound has consistently provided the most powerful, best-sounding and most reliable amplifiers in their class. The JC 2 BP – the world’s finest stereo preamplifier – takes Parasound to a new level of performance. John Curl’s design, meticulously hand-crafted, is a masterpiece of sound and beauty.
The JC 2 BP features a premium analog input stage with fully balanced, dual-mono topology from input to output. All AC power supply components are isolated from the audio circuits for purest sound quality.
The JC 2 BP features an outstanding fully discrete JFET phono preamplifier stage that can be easily configured for moving coil or moving magnet operation.
The JC 2 BP includes a high-quality MM/MC phono preamplifier stage with ultra low noise and distortion.
The JC 2 BP uses six premium analog inputs and two outputs, selectable as balanced or unbalanced, including one tape loop output. All connections are made via gold-plated RCA jacks with internal wiring by Cardas Audio and Nordost Valhalla.
The JC 2 BP has two balanced inputs and two balanced outputs, selectable as balanced or unbalanced using internal jumpers. All connections are made via gold-pl.
When you think of hi-fi gear, the name Marantz may be one of the first to come to mind. The company has been producing top-quality audio equipment since the 1950s and their reputation is still going strong.
Marantz has gone through several different owners since its founding, though it’s currently owned by Sound United LLC (which also owns Denon and Polk Audio).
It’s not hard to see why Marantz has become synonymous with high-end audio gear. Their products are built with quality in mind, making them a popular choice among audiophiles who want to take their listening experience to the next level.
The Marantz PM8006 is an integrated amplifier that delivers a high-quality sound at an affordable price. It’s designed for people who want to enjoy their music without spending too much money on equipment or having to splice together a bunch of components from different manufacturers just so they can get the features they need.
The PM8006 features five analog inputs plus one digital input, which means it can be used as part of a home theater system or just plugged into your computer for listening purposes.
7.Denon AVR-X4700H 8K Ultra HD 9.2 Channel
The Denon AVR-X4700H is a powerful 9.2 channel AV receiver which features immersive 3D audio and high performance 32-bit D/A converters for superb surround sound with the latest video technologies.
The AVR-X4700H has plenty of power at 125 watts per channel. That’s enough to fill medium to large rooms with no problem, and it does so effortlessly, maintaining a good sense of control. This is an 11.2 channel receiver that can also be used in a 7.2.4 or 5.2.6 configuration to accommodate an overhead Atmos speaker setup (or other speakers) with an additional 2 channels of amplification provided by two external amplifiers (sold separately).
Denon has impressed us with the AVR-X4700H’s design, build quality, connectivity options and ease of use, but it is its audio performance that really stands out – it sounds terrific! With plenty of power on tap, there’s never a feeling of running out of steam, even when playing at higher than average volume levels. This 9.2 channel receiver also supports immersive audio formats like Dolby Atmos and DTS:X, as well as Auro-3D and IMAX Enhanced.
In the past we have been able to offer some amazing deals on SVS subwoofers, but this one might be the best we have ever offered. We’ve been fans of the SVS PB-2000 for a long time and when they released the Pro version, we knew it would be a special subwoofer.
The original PB-2000 was one of our favorite subs under $1,000 since it was introduced in 2015. It’s won numerous awards, including our own Highly Recommended award and a Best Buy Award from Sound & Vision Magazine. The new PB-2000 Pro takes everything that made the original great and adds more power, more features, and more performance to make it even better.
Like all SVS subwoofers, the PB-2000 Pro is built to last with an acoustically inert cabinet that houses a 12″ high-excursion driver with dual ferrite magnets and a 2.5″ voice coil which is powered by a 550 Watt RMS amplifier that can peak at 1,500 Watts of power for short periods. The amp is fully discrete MOSFET design with fully discrete output devices on all channels for low distortion, high linearity and extreme reliability.
The SB-3000 subwoofer is a perfect match for larger rooms and also for those who want the ultimate in low frequency extension, output and control. The 13-inch driver delivers jaw-dropping SPLs and can shake a house to its foundation, while maintaining pinpoint accuracy and control that is typically only found at much higher price points.
At 13 inches in diameter, the proprietary SVS driver boasts an aluminum vented cone that is exceptionally stiff yet lightweight. The distortion-reducing motor system features an advanced suspension design for consistent travel over long excursion ranges and incredibly detailed transients. An injection molded extreme-excursion surround with exceptional memory properties allows the driver to move huge amounts of air without any hint of distortion or loss of control.
The real magic happens behind the scenes, where the SB-3000 subwoofer pairs a powerful 800 watts RMS, 2,500+ watts peak power DSP amplifier with a state-of-the-art 50MHz Analog Devices Audio DSP that is at the heart of the Sledge STA-800D2 amplifier. Sophisticated feedback algorithms and room gain compensation ensure tight bass at any listening level by continuously measuring output against input and making rapid corrective adjustments hundreds of times per second.
The SVS 3000 Micro is a tiny subwoofer but one with big performance. It’s the first in its category to integrate a high-excursion 12-inch driver and 300 watts RMS, 700+ watts peak power Sledge amplifier with fully discrete MOSFET output into a compact cabinet measuring only 14x14x15 inches.
An advanced DSP control system provides extensive user controls while maintaining seamless integration with the rest of your system. An App is available that allows you to set up, configure and control your SVS 3000 Micro Subwoofer from anywhere in your home or on the go.
The SVS 3000 Micro has a 12-inch ultra-high-excursion driver, which is made possible by an overhung motor configuration and aggressive venting for exceptional power handling, acoustics and reliability for higher output levels at reference playback levels.
The driver also features proprietary injection-molded NBR surrounds built for extreme excursion and longevity at reference playback levels. A high current 4-layer copper voice coil winding minimizes distortion and power compression while providing effective heat dissipation and tuned magnetics for accuracy at high excursion. The formidable proprietary ferrite motor system generates high flux density magnetic fields to drive room filling sound pressure levels.
