10 Best Gimbal For Sony A7R IV 2022 – Reviews & Guide
Do you want to take your photography skills to the next level? If yes, then you will have to purchase a gimbal for your Sony A7R IV camera.
A gimbal is a device that helps you capture smooth, blur-free photographs and videos, even when the camera is moving. It uses an electronic system that has motors and sensors to stabilize the movements of the camera.
Gimbals are used by professional photographers and videographers in different situations to capture sharp and stable images. This includes scenes where the photographer or videographer could be moving as well as when they are stationary.
Read Also: 10 Best Gimbal For S10 Plus 2022 – Reviews & Guide
If you want to choose the best gimbal for the Sony A7R IV, there are a few things you need to consider first. These include:
The type of gimbal you want: There are two main types of gimbals: active and passive. The active gimbals use motors to stabilize the camera, while passive ones rely on inertia and other physical principles.
The DJI RS 2 is the lightest and most portable 3-axis gimbal stabilizer with a 10lb payload. The RS 2 is made from carbon fiber, making it more durable than aluminum and lighter than magnesium. The RS 2 has a 1.4-inch LCD touchscreen to quickly adjust gimbal settings and activate ActiveTrack 3.0 for stable tracking shots with just the touch of a button. It also comes with a dual-layer camera plate that is compatible with both Manfrotto and Arca Swiss standards for compatibility with most camera support gear on the market.
The DJI RS 2 features intelligent functions such as Force Mobile, ActiveTrack 3.0, Timelapse, and Motionlapse, which allow users to create cinematic content at the push of a button or by using the Ronin app on their mobile device.
DJI RS 2’s innovative features include SmoothTrack which allows the gimbal to be used as a traditional handheld stabilizer or as an extension of your body’s movements when mounted on a crane or jib.
DJI RSC 2 is the second generation of DJI’s popular Ronin series. It features a foldable design, so it can easily fit in your bag and go wherever you do. Folded up, it’s smaller than a sheet of A5 paper and weighs only 2.6 lb. When unfolded, it’s ready to shoot in seconds with a 6.6 lb tested payload capacity.
With its 3-axis gimbal system and Titan Stabilization Algorithm, RSC 2 achieves incredible stabilization while capturing smooth footage at all times. SuperSmooth mode increases the torque on each axis to compensate for micro-movements and make your 100mm zoom lens feel like a 24mm wide-angle lens.
A 1-inch built-in OLED screen gives you complete control over gimbal movement, camera settings, and more, right at your fingertips. The included high-capacity batteries provide an impressive 13 hours of battery life on a single charge, so you have plenty of time to perfect every shot.
RSC 2 features a Manfrotto + Arca dual-layer camera mounting plate that comes equipped with DJI’s quick release technology for fast switching between horizontal and vertical shooting modes.
Bestseller No. 1 2022 HP Pavilion 17 Laptop, 17.3″ FHD IPS Display, 11th Gen Intel i5-1135G7(Up to 4.2GHz, Beat i7-10710U), 16GB RAM, 1TB PCIe SSD, Backlit Keyboard, HDMI, WiFi, Bluetooth, Webcam, Windows 11+JVQ MP
Use the Ronin App to get access to preset scenarios, and the camera balancing guide, along with tutorials to help users master their handheld gimbal. The app also minimizes hardware tuning, setting filmmakers free to produce great footage.
The most compact and portable 3-axis stabilizer in DJI’s handheld gimbal series, Ronin-SC was built for mirrorless cameras and allows you to shoot with the freedom of stabilized shots on the move.
The Ronin-SC stabilizer for mirrorless cameras supports a wide range of cameras and lenses. It has been rigorously tested to support a payload of 4.4 lbs / 2.0 kg while still achieving a smooth, cinematic shot.
Offers a suite of advanced capturing features to unleash your imagination like Panorama, Timelapse, Motionlapse, Motion Control, ActiveTrack 3.0
Axis locks on each arm allow for faster storage and individual axis balancing. The Quick-Release Plate includes a positioning block to memorize the perfect camera position for instant remounting.
The Ronin-S Essentials Kit bundles the Ronin-S gimbal with a handful of select accessories designed to help you get the most out of your camera. The included focus wheel offers finer control over focus while filming, while the focus motor and rod mount can be attached directly to the Ronin-S, allowing you to use a lens with gears for greater focus accuracy. The accessory holder can be used to attach an external monitor or microphone via two threaded holes on top, and the included large lens support provides added stability when using a heavier lens.
The Weebill S is the latest three-axis handheld gimbal stabilizer from Zhiyun, capable of supporting mirrorless camera and lens combos up to 3.75 lb. It’s been updated with a new quick-release system for attaching and removing your camera via the included Manfrotto-standard plate.
The S also features a brand new TransMount Image Transmission Module that allows you to transmit 1080p30 video to an optional receiver up to 100′ away (compatible with iOS/Android devices). It’s also compatible with the optional Wireless Focus System, which allows you to remotely control focus or zoom on select cameras.
The MOZA AirCross 2 is a lightweight yet powerful 3-axis handheld gimbal that’s ideally suited for mirrorless cameras and DSLRs, with micro 4/3 lenses or conventional lenses. Not only does the AirCross 2 have a higher payload of 3.2kg than its predecessor, but it also offers 12 hours of battery life and one-handed operation.
The MOZA AirCross 2 features a large folding handle design that can be easily switched to a side handle, allowing you to switch between underslung and upright modes in just seconds. This allows you to capture various angles using the same gimbal. The redesigned thumbstick gives you improved control over the gimbal movements. An OLED screen on the handle displays useful information regarding your device and settings.
In addition to the standard follow mode there are 6 operating modes including pan following, locked, FPV, vortex, and inverted mode. Invert Mode allows you to get shots from behind your back and even upside down shots. Vortex Mode creates 360° rotations around the roll axis for unique cinematic shots showcasing your surroundings.
The EVO Rage Gen2 camera stabilizer supports both mirrorless and small body DSLR cameras up to 5.5lbs. The EVO Rage Gen2 is one of the lightest stabilizers in its class weighing in at just 2lbs. Mount almost any mirrorless or small body DSLR camera to the Rage Gen2 using the included 1/4-20 standard tripod mounting screw.
The EVO Rage Gen2 supports a camera payload range of 0.75lbs up to 5.5lbs (350g to 2500g) alongside 3 seperate motor power settings for best performance (weak/middle/high). A strong, lightweight and portable design makes this gimbal perfect for travel or a day of shooting on location.
Integrated CCI Technology for SONY & Panasonic: Control Camera Shutter, Video Start / Stop and Zoom (some servo-driven lenses) right from the Rage Gen2 handle controls (requires direct CCI connection via Sony multiport or Panasonic 1/8″ shutter jack).
CRANE 2S is a professional 3-axis handheld stabilizer designed for DSLR and mirrorless cameras. It has high torque motors to provide the power needed for larger cameras, with the ability to handle up to 3.5kg in weight. CRANE 2S allows 360° unlimited rotation along all three axes, and supports synchronization of pan & tilt motions.
The CRANE 2S also features a quick-release system that can be released using either hand – it’s as simple as pressing a button and turning a knob. This makes changing batteries and memory cards much quicker and easier than previous models, saving time during shoots, and allowing you to stay on location longer.
The CRANE 2S has an OLED screen on the back of the gimbal that displays important information such as battery level, axis status, mode status, Bluetooth connection status, and more.
The Ikan DS1 Beholder Gimbal is a handheld, 3-axis gimbal stabilizer designed to support DSLR and compact system cameras and lenses weighing up to 3.7 lb. A simple locking mechanism allows you to quickly switch from underslung to upright operation and back again. The DS1 Beholder has an illuminated ON-OFF switch/battery indicator that displays how much charge remains in the lithium battery.
The DS1 is equipped with 3 Axis Gyro Stabilized Brushless Motors to balance most Mirrorless Cameras and incorporates roll, tilt and pan control for smooth and seamless movements. You can effortlessly capture complex shots with one hand operation and with the included 12V DC power adapter you can use the Beholder Gimbal continuously with no battery concerns.
The MG V2, an upgraded version of the original MG gimbal, is coming to the market and it has some great new features. The industrial design of minimalism integrates with very strong practical operation functions.
360 degrees brushless motor + slip ring design makes 3 motors on the 3 axes be able to rotate 360°, which bings more possibilities for creative shooting.
Creative gimbal stud connector design, more easy to switch between one-hand-hold and two-hand-hold or upright and inversion installing by using some supplied simple accessories. No matter it is used in big or small space, with one MG, much easier to shoot stable videos in 4 working modes.
Advanced electric control module: It is with one four-directional joystick for 360 degrees angle to adjust easily. Power on/off and function switching can be realized by one button.
Gimbal handle adopts the highly integrated design, the tail part continues to use the mature internal thread design, compatible with all kinds of extension devices with threaded joints.